Features
Features & Benefits:
High Brightness
Our LED T8/T10 Fluorescent Light Tube consists of high quality SMD LEDs and can emit a higher brightness at much lower cost.
Easy Installation
Our LED T8/T10 Tube can be easily installed like a conventional T8 fluorescent light into the existing sockets.
Extended Life
With very little heat output, proper drive characteristics and high quality LEDs, our LED T8/T10 Fluorescent Light Tube has a lifetime of up to 80,000 hours.
The LED T8 Tube is manufactured under ROHS, contains no MERCURY, Emits NO RF interference!!
Humidity/Moisture Resistant
With IP54 degree protection, our LED T8/T10 Tube Light can operate normally even in a moist indoor environment.
Energy Saving!
Our LED T8/T10 Fluorescent Lights consume power from 7W to 36W. This saves much more energy than conventional fluorescent T8 light tubes.
The LED T8/T10 Fluorescent Light Tube is completely enclosed. The LEDs are surrounded by a Clear acrylic lens and emit light like a conventional T-series fluorescent light. Our LED T8/T10 Tube is typically used for lighting in Garages, Basements, Task Lighting, Store Displays, General Warehouse Lighting, RVs, Buses, and Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere you have a T8 series fixture!
Available in four different color temperature renderings:
Warm White: 3700 Kelvin; ~ 800 lumens - Yellowish Light
Natural White 4100 Kelvin; ~ 850 lumens - Slight Pink Light
Daylight White: 5500 Kelvin; ~ 900 lumens - Pure Day White
Cool White: 7000 Kelvin; ~ 950+ lumens - Bluish Light
Aluminum heat sink, 160 LED's, available in Warm White, Day White Natural White or Cool White, No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescent . No mercury, no ballast required, wide voltage and constant current design, solid state, high shock & vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, This product is CE Approved. The products are also in accordance with CE and FCC testing standards. Retro-fit kits available for direct replacement of fluorescent fixtures.
** Removal of the ballast and started in the fixture are required. Please see our product support section for important information and details on removing the ballast in your fixtures.
|
